Review – LowePro Classified 250AW

For a little bit of a change, I asked the folks at LowePro to send me a shoulder bag for my latest review. They sent me the Classified 250AW. The Classified 250 AW has room for 1-2 SLRs with a lens attached, 2-3 more lenses and up to a 15.4 inch laptop.

I was heading down to the PhotoPlus Expo in New York City, so I decided to bring the bag along to test it out. I knew I would need space for things I was going to pick up throughout the day, so I took out a lot of the separators and put in the bare necessities for camera gear. I took my body and two lenses, put them in one side of the main compartment, and left the rest for storage.

Using the luggage sleeve on the back of the bag, I attached it to a rolling bag that I was also bringing along for the show. It was the perfect fit and made my life a lot easier that day.

The front of the bag has a flap that hides two large velcro closure pockets for storage and another large pocket that runs the full width of the bag. The large pocket can hold a lot of extras and includes a key clip and a memory card holder. The memory card hold will accept up to 6 memory cards. It rolls up nicely and seals with velcro. In this section, there is also an zippered section that will allow the bag to expand for a little more room.

On the back side of the bag, along with the luggage sleeve, there is another pocket. The pocket is thin, but is as deep and wide as the bag. On the bottom of the bag, there is a velcro pocket that hides the All Weather Cover. Just slip it out and right over the bag for protection from the elements.

I really liked the many uses of this bag. It not only makes a great camera bag, but also a great laptop bag. While not it’s intentional use, I really liked using the extra room in it for carrying information and items picked up at the PhotoPlus Expo. This is a great bag! I highly recommend it.

Here are some specs from LowePro‘s site:

Capacity:

1-2 professional DSLRs with 70-200 f/2.8 lens attached plus 2-3 additional lenses or flash, plus 1 widescreen notebook up to 15.4″ (most models)

Size(Interior):

15W X 6.3D X 11H in./38 X 16 X 28 cm Size

(Exterior):

18.3W X 11D X 14H in./46.5 X 28 X 35.5 cm

Notebook Compartment Inner Dimensions:

13.8W X 1.4D X 11H in./35 X 3.5 X 28 cm

Front Compartment Inner Dimensions:

6.7W X 1.2D X 8.7H in./17 X 3 X 22 cm

Outer fabric:

840D x 150D Nylon Poly Blend PU, Full Grain Leather, 420D Nylon, 1680D Nylon PU, Dry Flo Mesh, 190t Nylon PU

Interior Fabric:

Velex PU, 210D Nylon PU, Brushed Tricot Nylon

Weight:

4.2lbs/1.9kg

The LowePro Classified 250AW is available in Black or Sepia and has a MSRP of $229.99.

Review – Spider Camera Holster

The folks at Spider Camera Holster were kind enough to send me a Spider Pro System to try out. At first, I must admit that I was a little nervous to hang my dSLR off my belt and walk around with it swinging, but it proved to be quite a nice piece of equipment.

Last week, I put it to use at the University of Albany athletic fields. The New York Giants hold training camp here in August and I decided I would go down and practice my sports photography while trying out the Spider Pro System.

As I arrived at the athletic fields, I grabbed the heavy duty belt and clipped it on. My first thoughts were that the material and the and the buckle were both very heavy duty and made me feel a little better about hanging my camera from it. I then noticed that the clip that closed the belt not only had two finger releases to open it, but also a third release that wasn’t going to let the belt slip open and fall to the ground.

Spider Belt

The main part of the unit was a base called the Spider Pro Plate. This plate comes with a built-in Allen wrench for attaching it to your camera. When you are done with it, simply slide it right into the plate until you need it again. It’s a great design idea! The plate has a Spider Pin attachment that connects your camera to the belt.

Spider Plate

Spider Pin

The Spider Pro Holster Box allows you to slide the Spider pin into it and lock it into place, assuring your camera wont pop out. There is a small latch you can flip that locks your camera into the Spider Pro for safety. Once in there, it will stay put and wont come out. Releasing the lock is just as simple. Just flip the latch the opposite way, and your camera comes right out.

Spider Pro

I really enjoyed testing this product. It was a very useful tool in the field. If I needed to free up my hands to talk to someone or set up a shot, all I had to do was clip the camera into the Spider Holster and I was free to do what I needed to without having to set the camera down on the ground or back in my camera bag. I would highly recommend adding the Spider Holster to your collection of photo gear.

***Images courtesy of Spider Holster***

Review – LowePro FastPack350

After my review of the FlipSide 300, the folks at LowePro sent me the FastPack 350.

The FastPack 350 is a bit larger and has some extra storage space. It also has room for a 17 inch laptop. You might recall that in my review of the ProRunner 450AW, I had a difficult time fitting my laptop in. This was not the case with the FastPack 350. My laptop fit in much easier.

The FastPack 350 is set up a little differently than most camera bags I have used before. Your camera equipment goes in the bottom of the bag, and that section opens to the side instead of from the top. Inside this area, you can store a DSLR with with a 70-200mm lens attached, along with 2 or 3 extra lenses and a flash. There are also two velcro pockets that can hold memory cards.

Along the side of the bag, you will find a long zipper that opens to provide storage for up to a 17 inch laptop. As I mentioned earlier, my HP 17 inch laptop fit in there with no problem at all.

The top portion of the bag opens to reveal a rather large storage area. Inside that storage area, there is a removable zippered pouch that will hold any extras you may be carrying with you. The storage compartment also has two velcro pockets that are great for holding extra batteries and remotes. Along with these pockets, there are pen holders, a mesh pouch and a clip for your keys. On the outside of this compartment, there is a zippered pocket that leads to even more storage space. This bag has quite a bit of room!

Just like the other bags I have tested for LowePro this bag has ample padding on the shoulder and waist straps, as well as the back area. When I was wearing this bag, it was comfortable and did not feel like it was too heavy. I even took it on the motorcycle one day just to try it out. It worked just fine on the bike, although I did not have my laptop in tow.

Specifications and Description from LowePro’s site;

Capacity:

1 pro digital SLR with lens attached (up to 70-200mm f/2.8), 2-3 additional lenses or flash units, 17″ widescreen notebook, memory cards, batteries and cables

Size(Interior):
11W X 6.1D X 10.6H in./
28 X 15.5 X 27 cm

Size(Exterior):
12.4W X 9.6D X 19.3H in./
31.5 X 24.5 X 49 cm

Notebook Compartment Inner Dimensions:
11W X 1.5D X 18.9H in./
28 X 3.75 X 48 cm

Weight:
4.08lbs/1.85kg

Go all day with the lightweight, comfortable Fastpack 350 backpack. It protects your pro digital SLR and 17″ widescreen notebook compactly while providing generous storage for other gear. Side-entry compartments let you quickly grab equipment and accessories, even while you’re on the move. Customize the easy-to-access main compartment with adjustable dividers. A comfortable mesh waistbelt, and an adjustable sternum strap, help distribute weight evenly. To help you make the most of this Lowepro bag take a look at our new product video.

Price: $149.99

Colors: Black, Arctic Blue/Black, Red/Black

Pros

Fits laptops up to 17 inches
Extra storage space
Heavy padding for comfortable use
Mesh side pocket for carrying water

Cons

No All Weather cover

This has been yet another great bag from Lowepro. I really enjoy testing them, as they make a great quality bag. See ya soon!

*Images courtesy of LowePro

Teaser – LowePro Flip Side 300

When the folks at LowePro asked me what camera bag I would like to try out next, I asked them for one that would be a little smaller so I could wear it on the motorcycle. I spend a lot of time on the bike in the warmer months, and carrying a huge backpack is not only cumbersome, but also very uncomfortable. So, they sent me the Flip Side 300 to try out. Here’s what I think so far…

The bag seems to be the perfect size for the bike. It is also a great fit for the equipment I need on a shoot. I can fit my camera with a 18-70mm lens attached, a 70-300mm lens, a 50mm lens, and a 55-200mm lens. There is also a pouch inside for chargers and miscellaneous other goodies you might want to carry. I took a pic with a little point and shoot last night and labeled it with what I had inside the bag.

So far, I am very happy with this bag. I still have to get it out in the field and try it out to see how it functions. I didn’t get to take a ton of pictures yesterday, as it was gorgeous out and the motorcycle took precedence. Don’t worry, though – there will be plenty of pics over the next few weeks. Until then, you will have to wait!

See Ya Soon!

Gary Fong – “The Puffer”

Fong "Puffer"

A while back, my Speedlight decided to stop working.  As you all know, the pop up flash on your camera can be pretty harsh, so I needed to find something that could replace the speedlight without the couple hundred dollar price tag.  I did without for a while, but the results were not good.  Harsh shadows behind people and flash glare ruined a lot of my shots.

I remembered that I had seen a vendor at the 2008 PhotoPlus Expo in NYC.  They had some funky looking diffusers, but the lines were pretty long, so I moved on.  I went into my local Ritz store to grab something quickly one day and I saw “The Puffer” on the shelf.  After a few questions, I decided to pick one up. Heck, it was only $20, so if it wasn’t great, I hadn’t lost much.  When I got it home I opened up the package and pulled out two pieces.

The two pieces were made entirely of plastic, and at first I was a little worried about snapping them when putting the device together or mounting it to the camera.  The base is a formed plastic piece that will slide into the hot shoe.  It has two small round dowels that slide into one of the eight holes on each side of the diffuser.  The diffuser looks like a portion of a golf ball, with tons of dimples in it to diffuse the light.  The back has 8 holes to raise or lower the diffuser depending on where you need more or less light.  It is a little tight going into the hot shoe, but once it, it is very secure.  It also seems to work pretty well.

Rear View

Puffer Front

I also took some shots of the unit on my Nikon D70.  The pics were taken with a little point and shoot, so they aren’t great.  I took shots of the top and back to show what it looks like when mounted.

Rear Mounted

Side View

As you can see in the bottom picture, the diffuser was set on the second hole from the top.  I would normally use it just below the middle hole to be aligned correctly with the on board flash.  Here are four shots I took.  Two were taken with the Puffer and two were taken without.  Sorry for the food products, as they were handy, so I used them.

When I shot these photos, I did not change the settings on the camera.  The only difference was whether the Puffer was on or off the camera.  You can see a huge difference in the brightness and colors in both pictures that the flash was used on.

I would have to say that the Gary Fong “Puffer” is definitely worth the money.  I have used it in a few situations and it seems to do the job a lot better than the on board flash would do.

Without the Puffer

With the Puffer

Without the Puffer

With the Puffer

Welcome to my blog

Hi all,

Some of you will already know me from my photography blog “The World Through My Lens”.  I am starting a second blog to get into reviewing products for the photography industry.  It is my plan to bring you fair, unbiased reports of the tools you need to function properly in the field.  I hope to find companies that will allow me to review their products in an effort to help them help you.

So, welcome to my new blog.  I hope to have some great information here for you very soon.  If you have a product for me to review, contact me at michael@michaelthenry.com – See ya soon!

Best,
Michael